> Resources > Disaster Recovery & Prevention > SD Products
SD Product Line

1. SD Clean
Powerful Cleaning

SD Clean is an industrial strength blend of quat-based surfactants that create a safe but powerful cleaner and degreaser that removes dirt, grease, and grime from hard surfaces. SD Clean leaves behind a fresh scent and no residue. The product can be used full strength, be diluted 2:1 in the field, or shipped in diluted concentrations upon request.

GENERAL INDUSTRIAL APPLICATIONS: Dilute 1 part product with 1 part hot or cold water (or use full strength) and spray or mop on surface. Allow contact time of 1 to 2 minutes and scrub. Wipe with clean towel or mop.

INDUSTRIAL FLOORS AND CONCRETE: Use full strength and apply with mop or pressure sprayer. Scrub using a floor machine or deck brush. Allow a contact time of 1 to 2 minutes but do not allow to dry. Pick up solution with wet pick-up vacuum; a mop and wringer; or flush to floor drain. Rinse thoroughly.

FOR USE IN AUTOMATIC SCRUBBERS: Add to the solution tank at a dilution of one part product with up to one part water, depending on amount of soil. Extremely soiled areas should be pre-treated with SD Clean, mix one part solution to one part water, before scrubbing. Pick up all residues of detergent solution and dissolved soils with vacuum pick-up or rinse thoroughly with mop and wringer.




5 Gallon Pail
Shipping Weight: 44 lbs.
Dimensions: 12" x 12" x 15" H
48 Pails per Pallet: 2,160 lbs.
11111

55 Gallon Drum
Shipping Weight: 481 lbs.
Dimensions: 23.75" x 34.75" H
4 Drums per Pallet: 1,870 lbs.
1111

275 Gallon ISO Tote
Shipping Weight: 2,350 lbs.
Dimensions: 40" x 48" x 46" H
1





2. SD Pro
Surface Defense Professional


Surface Defense Pro, SD Pro, is a professional grade surface coating designed to provide ongoing control of bacteria, mold, and algae that can cause surface damage, stains and odors for many years depending on the levels of abrasion the product is subjected to. Apply SD Pro inside wall cavities, on flooring, decking, painted surfaces, siding, glass, metals, or virtually any dried surface. One gallon of product will treat approximately 3,750 square feet of surface area when applied via an electrostatic sprayer. SD Pro is classified as a Treated Article Under US EPA FIFRA regulations and is registered as a long lasting disinfectant in multiple international markets.

  • A year or More of Activity
  • Dries in 1 Hour Or Less, Without Changing Surface Look or Feel
  • Resistant to Most Common Cleaning and Disinfecting Chemicals
  • Applied by Trained Applicators

Application Instructions:
SD Pro is applied using specialty electrostatic equipment provided by SD Labs and is only available to organizations and individuals who have been factory trained on the appropriate application techniques and practices. SD Pro should only be applied to pre-cleaned surfaces free of oil, dirt and other contaminants and be at 50 degrees F or higher to assure proper bonding and a short drying time. The product should be stored at room temperature and not be allowed to freeze.
SD Pro Application Video: https://www.youtube.com/watch?v=X80hoKdDN60



5 Gallon Pail

55 Gallon Drum

275 Gallon ISO Tote

Shipping Weight: 44 lbs.
Dimensions: 12" x 12" x 15" H
48 Pails per Pallet: 2,160 lbs.
1111

Shipping Weight: 481 lbs.
Dimensions: 23.75" x 34.75" H
4 Drums per Pallet: 1,870 lbs.
1111

Shipping Weight: 2,350 lbs.
Dimensions: 40" x 48" x 46" H
1




3. SD-ST
Surface Defense Short Term


Ready-to-use consumer formula for direct trigger or pump spray application by the consumer or trained technician to
almost any surface. Upon drying, the product leaves behind an invisible, non-tactile coating that inhibits the
growth of a wide variety of surface damaging and odor-causing bacteria, fungi, algae and molds for up to 90 days or more depending on use conditions. The product also controls odors, stains and surface damage caused by these organisms. SD-ST is classified as a Treated Article Under US EPA FIFRA regulations and is registered as a long lasting disinfectant in multiple international markets.

  • Ready to Use Formulation
  • Up to 3 Months of Activity
  • Inhibits Mold, Mildew, and Algae from Flooding
  • Can Be Used on Almost Any Surface

Store at a temperature of 65°F or higher for greatest efficacy. Shake well before each use.

SD-ST APPLICATION INSTRUCTIONS - SURFACES
Surface must be clean of dirt, dust, and oils prior to application. Test for staining and color- steadfastness of fabric or surface by treating and drying a small concealed area prior to application. Spray entire surface area from a distance of 16 – 24 inches, ensuring complete coverage. Porous substrates and textiles will require greater amounts of product to account for absorption of SD-ST into the treated area. See instructions below for treatment of electronic devices. Lightly wipe after 3 – 5 minutes with a clean microfiber or lint-free cloth. Allow to dry thoroughly. If spotting occurs, moisten a cloth or sponge with SD-ST and wipe the area.

SD-ST APPLICATION INSTRUCTIONS – PERSONAL ELECTRONICS EQUIPMENT
Surface must be clean of dirt, dust, and oils prior to application. Test for staining and color-steadfastness of fabric or surface by treating and drying a small concealed area prior to application. Moisten a clean lint-free microfiber cloth with the product and apply liberally to the surface you wish to treat. Use caution to avoid injecting liquid into sensitive components or openings. Lightly wipe after 3 – 5 minutes with a clean microfiber or lint-free cloth. Allow to dry thoroughly. If spotting occurs, moisten a cloth or sponge with SD-ST and wipe the area. Care should be used not to over-saturate areas which may be sensitive to liquid or spraying into equipment and device. Application Video: https://www.youtube.com/watch?v=X80hoKdDN60


Case of 32-ounce Spray Bottles
5 Gallon Pail

55 Gallon Drum
275 Gallon ISO tote
12 Units Per Case
Shipping Weight: 29.5 lbs.
Dimensions: 14" x 11" x 12" H
111
Shipping Weight: 44 lbs.
Dimensions: 12" x 12" x 15" H
48 Pails per Pallet: 2,160 lbs
111

Shipping Weight: 481 lbs.
Dimensions: 23.75" x 34.75" H
4 Drums Per Pallet: 1,870 lbs
1111
Shipping Weight: 2,350 lbs.
Dimensions:


Ordering & Pricing Information:
SD Labs is offering discounted pricing to shipments sent directly to the areas impacted by natural disasters and only in the USA.
  • Costs indicated do not include sales taxes, shipping and freight charges.
  • All orders must be prepaid prior to shipment, credit card and wire transfer fees added to all orders.
  • Customer may arrange for pick up of products by their carriers at our production facility in Terryville, Connecticut 06786, USA.
  • Customer may provide their own account numbers for shipping via Federal Express and UPS.
Please email request for quote to: Info@SDLabs.com

1